The cooler months are just around the corner. Now is the perfect time to have the heating system inspected before the colder temperatures arrive. If the system requires any Heating Repair in Pittsburg KS, correcting the issues before the heater is needed full time can ensure that it will be up and running when the outside temperature drops.
A heating system inspection can detect issues before they escalate in a heating system failure. During an inspection, the technician will check the vents, flue, and intake grills for any blockages or leaks, examine the heat exchanger for damage, clean debris from the blower and check the blower belt and access door seal. The technician will also do an amp-draw test on the blower motor to ensure that it meets the proper safety standards, check all electrical components and wiring, lubricate the moving parts in the motor, test the thermostat and start-up cycle for accuracy, and change the air filter if it’s dirty.
Oil and Gas Systems
In heating systems that are powered by oil or gas, the pilot light or electronic ignition should be checked for proper operation. The technician will also examine the burner, look for leaks in the fuel lines, test the manifold gas pressure and analyze the combustible gases to ensure that they meet the specifications listed on the furnace. If any issues are found during the inspection, they should be addressed right away to avoid further damage to the heating system.
Common Repair Issues
When problems are found with the heating system, Heating Repair in Pittsburg KS should be done promptly. This can be as simple as adjusting the thermostat to maintain the correct temperature, repairing a faulty ignition or pilot, or replacing a dirty air filter. If a squeaky sound can be heard, the blower belt may need to be replaced. Worn out ball bearings or a broken heat exchanger are some of the major issues that require immediate attention, and the heating system should not be run until these repairs have been completed.
Once the colder weather arrives, the heating system will be used on a daily basis. A preseason inspection can make certain that it’s fully operational and capable of providing the necessary warmth in a home or business. For more information, please visit Cdl-electric.com.
Connect with us on Facebook and see our latest news and updates!
Be the first to like.