Augers In Oregon: Using Them Safely

Posted by Daniel Lawrence on July, 2017

The grain augur is basically a large steel corkscrew that steadily pushes harvested grain up to the inlet to the silo itself. This takes a lot of backbreaking labor out of the job of storage, but there are cautions to be observed, as any supplier selling Augers in Oregon would advise any new farmer and even a few experienced ones.

How Often Grain Augurs Are Used

Grain augurs are used around harvest time. The rest of the year, they sit unused, and like any machine undergoing a prolonged period of disuse, it can fall out of proper maintenance. Consider how moving parts tend to freeze in place after weeks or months of not budging so much as a single inch.

Also, the longer a machine or tool goes unused, the less familiar the owner becomes with its operation. Memory fades under the continual stress of daily living and labor as the brain’s attention concentrates on the vital, everyday tasks. The tendency to forget how to operate a farm machine that is used once a year for a period of a few days is an easy one to fall into.

As a result, farmers will forget not only the proper operation of the grain augur but also what parts of it may require maintenance and minor repair. Also, a machine that has not been properly maintained is a potential hazard. The risk of serious injury or even death from neglected equipment is an omnipresent problem in many workplaces and on the farm as well.

Inspection And Maintenance

What any dealer of farm machinery and equipment like Augers in Oregon would advise their clients is to run through a complete checklist while conducting a pre-usage inspection. Each item on that checklist can be taken in turn and problems listed prior to doing any actual maintenance work to construct a complete picture of the procedure to bring the unused augur back into operational condition.

A thorough machine inspection involves ensuring that all guards are secured in place, particularly the one at the intake. All warning labels and safety decals should be replaced at this stage to ensure clear, legible information appears on the unit. The winch and cable should also be thoroughly inspected to guarantee its security and proper operation, as well as all oil levels and the tightness of the fasteners. For more information on these and other topics, Visit Millserviceco.com today.

Be the first to like.

Be Sociable, Share!
    Shares